Home Overview Contact Us Stretch Wrapping Equipment Stretch Films Shrink Wrapping and Bundling Equipment Shrink Films Tapes 3M Products Plastic Strapping Equipment Plastic Strapping and Tools Steel Strapping Cushioning and Edge Protection Polyester Strapping

For solutions to your packaging problems call: 1-800-464-3044

Steel Strapping Tools & Stainless Strapping

Steel Strapping Tools - - Supplier - Service - Repair

Strapping Tools Repaired Los Angeles - All Brands.

Steel Strapping Seals

Type		Description
Open		Open Steel Strapping Seals have open legs to permit them to be snapped onto the overlapping strap-ends prior to tensioning.
Push Type		Push-type strapping seals have closed overlapping legs to be used with push-type tensioners for steel strapping.
Magazine		Magazine seals for strapping tools and machines. Open seals in clips of 50 or 100 pieces for easy loading of seal magazine. Used with combination strapping tools and strapping machines.
Cross-Tie		Cross-tie seals have open legs and are snapped onto straps perpendicular to each other to keep steel straps in position.

Cutters and Sealers for Strapping Tools

Strapping Tensioners for Steel & Polyester

Steel Strapping Tensioners, Steel Strapping Dispensers & Cutters

Dispensers for Steel Strapping MILL (oscillated) WOUND - Across standard 2 1/2" face width. Inside diameter 16". Outside diameter 23" (approximate).
RIBBON WOUND - Coiled with each lap directly over the preceding lap. Face width equals strap width. Inside diameter 16". Outside diameter 23" to 27" (depending on strap size).
Pneumatic wire wrapping tools.

Pneumatic Air Steel Combination Strapping Tools

Seal-less Joint

Seal-less Strapping Tools

Steel Strapping Tool - Stainless Strapping - Galvanized Strapping Tool Sizes

Regular Duty	Hi-Strength	Hi-Strength Maxi-Ten	Hi Tensile Megadyn	Super Hi-Tensile
3/8" x .015 3/8" x .020 1/2" x .015 1/2" x .020 1/2" x .023 5/8" x .015 5/8" x .020 5/8" x .023 3/4" x .015 3/4" x .020 3/4" x .023 3/4" x .025	1/2" x .020 1/2" x .023 5/8" x .020 5/8" x .023 3/4" x .020 3/4" x .023 3/4" x .025 1/2" x .020 5/8" x .020	1/2" x .016 1/2" x .018 5/8" x .016 5/8" x .018 3/4" x .016 3/4" x .018	1/2" x .020 1/2" x .023 5/8" x .020 5/8" x .023 3/4" x .020 3/4" x .025 3/4" x .031 1-1/4" x .025 1-1/4" x .031 1-1/4" x .035	3/4" x .023 3/4" x .029 1-1/4" x .029

Call for Specifications of your Steel Strapping Tools

Note: Both seal and seal-less combination tools are available in common sizes for steel strapping.

Click on "Plastic Strapping Tool Information"